Sealers Unlimited supply's & represents manufacturer's of a complete line of Heat Sealers and Vacuum Sealers to meet the needs associated with packaging of sterile medical
devices, pharmaceuticals, bio-tech, clean-room, electronics, food, cosmetics and industrial products. Our line of Heat Sealing Machines includes  Medical, Impulse, Constant Heat
and Vacuum Sealers. Our Vacuum Sealer line from the HDMP to the Budget Vacuum Sealer, have the muscle and versatility to handle virtually any sealing, vacuum sealing, or
modified atmosphere packaging application. Specialty Sealers include Tube Sealers, Feed-Through Sealers up to 120" or Manual Sealers.
Need a Smaller Machine ?
The TC-280 will seal a 12" x 15"  bag  or      
multiple smaller bags SPECIAL-
ONLY
$1795.00  
                        Special Save $700
IN STOCK   Details Click HERE
TC-420P & TC 420P2 TABLE MODELS  MADE IN USA
VACUUM PACKAGING MACHINE
For Directory of all Chamber sealers CLICK HERE
These Machines are shipped on a Pallet by Freight
Line Only.To avoid damage.
TC420P1 Standard.Suggested Retail $3738.00
OUR PRICE $2695.00
We will beat any legitimate quote by 5%
NSF Approved
TC - 420LP2  Left and Right or front & back seal bars for
Higher Production - Seal Multiple bags at the same time

TC-420P2 Specifications:

Seal Bar Length :17.7"/450mm x 2 Sealer bars.

2 Side Seal Bars on Left & Right of Chamber
Seal Bar Height Approx 1 1/2"

Seal Bar Distance Between : 14.5"/368mm

Chamber Depth: 8.1"/205mm

Chamber Size: 18.3"/465mmL x 17.3"/440mmW

Vacuum Pump Capacity: 21m3/h

Power: 1.6 kw

Cycle Time: 25 ~ 35 second

Voltage: 110V (Other Voltages Are Available)

Machine Size: 20.6"/522mmL x 21.7"/552mmW x
20.9"/530mmH

Machine Weight: 154 lbs/ 70 kgs
Custom Size Available
Specification Subject To Change Without
Notice


NOTE IMPORTANT THIS MACHINE IS SHIPPED
DRY YOU MUST ADD OIL (SUPPLIED ) TO THE
VACUUM PUMP BEFORE USING Simple to do
instructions included.
Standard Features:

Totally built in stainless steel construction
Transparent Lid Bladder Activated Sealing

Stainless steel housing MPC
20-Microprocessor Control (20 Program
With Oil Indicator)

Hot Wire Seal/Cut-Off

Water Resistant (IP 65)

PICTURE SHOWS LDC Digital Control Panel)

Seal Bars Located At The Left And Right
Side Or Front And Back. For Faster
production seal multiple bags at the same
time.
Options:
Spare Parts Kit $224.00

Sensor Control call for quote
(Controls the percentage of vacuum)

Gas Flushing  $Add $525.00  ( Flush
with nitrogen to eliminate oxygen)

Air Regulator $205 (Soft Air )


Extra Filler Board $63.00

220 Volts not available on this
machine we have a model with 220
volts 1 phase contact us
Manufacturer's  
Suggested
Price  $$3295
Model TC-420P2

OUR PRICE
$3195.00

We will beat any
legitimate price
quote by 5%
P2
LR
FOR The TC- 420P2 Model with 2
seal bars left & right or front &
back for higher production
SCROLL DOWN
Features:
Totally built in stainless steel construction. All Parts
available in CA.
Network of service centers across USA

Single Front Removable 18" sealing bar

Transparent DOME Lid Provides 8" chamber height.

Stainless steel housing

Oil Driven vacuum pump

Hot Wire Seal/Cut Off Included

Will seal a bag 18" x 18" or multiple smaller
bags for higher production eg:
Three 6" x 15" bags at once

Options: Can Be Added
Spare Parts Kit  TC-420P1 $168.00

Sensor control add $485.00 Controls % of vacuum meats
etc.

Gas flushing add $446.00 Injects Nitrogen to eat up Oxygen

Soft air Add $205.00. Used with powders on seal cycle or to
stop bag     wrinkle

Bi-Active Sealing. TOP & BOTTOM seal 2 seal bars for extra
thick bags eg:5 mil or gusset cal for Quote.

High Pressure Seal Add 113.00. Extra pressure on seal
used for instance raw chicken where grease may be on
sealable part of bag    or extra thick bags

220 Volts 50 hertz Single or three phase add $685.00
(P1 or P 2 )
Extra Filler Board $63.00
TO ORDER  SCROLL DOWN
Technical Data Sheet :
Sealing Bar Length: 17.7" (450mm) x  1 Seal Bar

Chamber height: 8.1" (205mm)

Chamber size: 18.3" (465mm) (Length) x 17.3" (440mm)
(Wide)
Vacuum pump capacity:21m3/h   Cycle Time: 25~55 Sec

Machine Size. 20.6" (522mm)Length  x 21.7" (552mm) Wide
x 20.9"        (  530mm) High.

Voltage: 110v  3 prong plug will work at 15 amps.Power:
1.6kwWeight: 154lbs (70kg)

(220 Volts not available on this machine we have a model
with 220 volts 1 phase contact us )
Why buy from us ?
We have been selling bag sealing equipment since
1979. We offer full manufacture warranty.
We work on low profit margin without any lack of
customer service or back up
with factory help and parts.
We sell USA built machinery whenever possible.
We WILL Quote the lowest PRICE !

Sealers Unlimited‘Since 1979’
Hand Impulse Sealers-Foot Sealers-Vacuum Sealers                                                 
Ph (760) 522-8389   Fax (760)-888-2000
Chamber vacuum sealers, vacuum sealer bags
NSF Approved
Vacuum Bags